1.1 Scope of application |
This product is a 6.2-inch four-wire resistive touch screen. |
1.2 Features and specifications |
l Feature |
Structure | Materials used | Item number | Description |
ITO FILM | PET film |
| ITO Film; Thickness: 0.188mm |
ITO GLASS | Glass |
| ITO Glass Thickness: 1.1mm |
Lead | FPC |
| Connector Thickness: 0.3±0.03mm |
Line key | Double-sided tape |
| Thickness D=0.1mm Adhesion>1300gf/20mm |
Structure | F/G |
TP surface characteristics | Anti-cow |
l specification (L=long; W=wide; T= thickness) |
Project | Specifications | unit |
Dimensions | 155(L)×88(W)×1.4(T) | mm |
View area | 138.52(L)×78.23(W) | mm |
Drive area | 133.5(L)×73.2(W) | mm |
Insulation point size and pitch | φ0.04,3×3 | mm |
1.3 Environmental parameters |
Project | Value |
Working temperature and humidity range | -20℃-+70℃,<90%RH |
Storage temperature and humidity range | -30℃-+80℃,<90%RH |
1.4 Mechanical behavior |
Items | Value |
Operating pressure | 30-120g |
Surface pressure resistance | 2kgf |
FPC heat sealing strength | FX>2kgf FY>500gf FZ>150gf |
Operating life | Strike life | >1,000,000次 |
Stroke life | >100,000次 |
Optical properties | Transparency≥83% |
Haze value | 8±2 |
Surface hardness | >3H |
Capacitance | <10nF |
1.5 Electrical performance |
Project | Value |
Maximum voltage | 5V(DC) |
Maximum current value | On the line | 25mA(max) |
Down line | 25mA(max) |
Loop resistance | X Resistance:400--900Ω Y Resistance:200—600Ω |
Insulation resistance | >20MΩ(DC25V) |
Linear | ≤1.5% |
Response time | ≤10ms |
Appearance inspection standard
This standard is only for the viewing area, because the area outside the viewing area will not have any effect on the appearance of the T/P. Such as: T/P surface with wipeable adhesions, stains, etc. will not be treated for poor appearance. But the product item "fracture, breakage" refers to the entire product.
<Test conditions>
Detect under a 12W-20W cool white fluorescent lamp at a distance of 400-500mm from the product. The visual inspection distance is 300mm (above 300mm can be seen as a defective product), and a black cardboard is added under the product as a background. The inspection time for each product does not exceed 10 seconds, as shown in the figure:
A source of light(12-20W)
